Bashers all over the world know what it takes to really blast in extreme conditions.
The KRATON 4X4 4S BLX is primed for multi-surface driving action, no matter how hard the elements fight back. Equipped with strong steel, lightweight aluminum and rugged composite materials, when you pilot the KRATON 4X4 4S BLX, you are in charge of a truly powerful force.
Designed FAST. With 4S brushless power on-tap from the ARRMA BLX 120 brushless system, there is nothing to hold back the KRATON 4X4 4S BLX.
Aggressive speed monster truck looks. The KRATON 4X4 4S BLX looks even better up-close and personal with great attention to detail on the decal and body aesthetics.
With a low-profile stance and equipped with a specially designed nylon rear wing, the KRATON 4X4 4S BLX is aerodynamic and really turns heads when you roll into town. When you pull the trigger you can expect superior handling and beautifully balanced flights from every jump.
Designed TOUGH. With bash-proven handling and tough bashing build quality, the KRATON 4X4 4S BLX will put you in control of exhilarating RC driving action, straight from the box. Rip-up your local dirt bowl or blast across the mall parking lot; whatever your chosen bash spot the KRATON 4X4 4S BLX can do it all.
A red anodized aluminum center brace adds longitudinal support to the chassis for maximum durability. This is attached to specifically designed mounts at the front and rear of the vehicle.
High-sides on the molded composite bathtub chassis ensure the amount of dirt and debris entering the chassis is kept to a minimum.
The center support brace features a rubber damper to provide just the right amount of support to the composite molded chassis.
High-strength hook-and-loop straps are used to keep your batteries in place.
The KRATON 4X4 4S BLX can accommodate battery packs with dimensions up to 6.50x2.01x1.89 inches (165x51x48mm).
Body post protectors mounted to the body shell prevent body post wear. Highly detailed decals are pre-applied to the beautifully detailed bodyshell. The KRATON 4X4 4S BLX looks good from whichever angle you admire it.
The KRATON 4X4 4S BLX features an adjustable multi-height wheelie bar as standard.
Hard-wearing dBoots Minokawa LP all-terrain tires are mounted on strong black nylon 5-spoke wheels, giving you the ground-ripping traction you need to put the BLX brushless power straight onto your chosen surface. 17mm wheel hex fittings allow the use of a wide range of third-party wheel and tire combinations.
Long, tough molded composite suspension arms front and rear give the vehicle an extra-wide stance.
The wide-track suspension features highly durable hubs and steering blocks. The wheels mount to heavy-duty 17mm aluminum wheel hexes.
ARRMA tough shock design. Tried and tested coil-over oil shocks feature a big-bore body for extra plush suspension. The innovative design shock rod end includes a molded-in spring perch and dirt shield.
Easy-access Electronics Module assembly can be extracted from the vehicle with the removal of only five screws. The module offers quick and easy access to the servo, electronic speed controller and receiver.
The two-piece molding comprises a lower box and upper lid that are sealed with high-quality rubber seals. The ESC and steering servo are attached to this molding, whilst the receiver sits inside the waterproof box.
Easy-access Power Module includes the motor, heat sink and fan, motor mount and slipper clutch. This assembly can be removed from the vehicle in seconds, with the removal of just one single screw.
With the Power Module removed from the vehicle the slipper clutch can be accessed with the removal of three screws. The triple plate slipper clutch in the 4S models features a steel spur gear making it ultra-durable in the most extreme conditions.
Easy-access differentials. Both the front and rear diff modules are easy to access ensuring that you spend more time bashing and less time in the workshop. The differential and input gear are housed in an innovative yoke, ensuring consistent gear mesh under brutal BLX power.
These differentials are TOUGH. The main differential gears have been super-sized with large pitch gears that have been designed to withstand huge torques, allowing lightweight composite material to be used for reduced rotating mass without compromising strength. The differential internals feature full-metal straight-cut gears, ensuring trouble-free operation.
The BLX120 120A waterproof ESC provides consistent power control and is 4S LiPo ready.
Fitted with reliable EC5 battery connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX120 ESC has over-voltage protection, and a two-stage LiPo cut-off for added cell management.
The fitted 12AWG high-quality wires and 6.0V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum
The BLX 3668 2400kV brushless motor provides both speed and torque and is perfectly balanced for use with our BLX120 ESC unit and 4S LiPo batteries.
A beautifully etched black aluminum motor can provide a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.
Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.
The ADS-15M steering servo benefits from metal gears and is fully waterproof.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.
The Spektrum STX2 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
Designed to be FAST, designed to be TOUGH. ARRMA want to provide our customers with an unforgettable RC experience that will blow you away.
Just add a 4S LiPo battery to your model and you are ready to blast past speeds of 50mph. No additional parts required!
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
ARRMA waterproof electronics are ready for action.
ARRMA will support your investment for two years. With our impressive limited warranty helping to keep you running for longer.
50+mph / 80+km/h
- Horizon Hobby Saleable Part #
- BUILD CONFIGURATION OPTIONS
528mm / 20.79"
327mm / 12.87"
58mm / 2.28"
395mm / 15.55"
402mm / 15.83"
192mm / 7.56"
3.63kg / 8lbs
165x51x48mm / 6.5x2.01x1.89"
2 Year Limited