The ARRMA TYPHON 4X4 V3 MEGA RTR is DESIGNED FAST, DESIGNED TOUGH — built for exciting bashing speeds and extreme, all-terrain durability. The V3 version has new features that enhance its unstoppable performance including a stronger chassis and retained hinge pin plates; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber shielded bearings throughout.
Standing out from the crowd is easy when you pilot the TYPHON 4X4 MEGA. A detailed pre-painted body shell provides protection against the elements. Universal-joint telescopic driveshafts, and durable composite suspension arms and hubs make your journey into wild locations even easier.
Designed to be TOUGH. Featuring precision aluminum, strong steel and tough composite materials, all combined in an easy-to-maintain vehicle design that is built for action, straight from the box.
The dual bell crank steering has been redesigned with extra clearance to prevent stones or debris jamming the steering mechanism during your bashing session.
With full-time four-wheel drive, the TYPHON 4x4 MEGA is ready to blast through your chosen environment. Telescopic driveshafts in the front, rear and centerline transmit drive from the slipper clutch to each wheel.
A sculpted rear wing provides high downforce at speed, keeping you grounded.
High-strength hook-and-loop straps are used to keep your batteries in place.
Heavy duty tough molded differential and input gears make the vehicle ready for BLX power upgrades in the future.
Steel spline inserts are molded into the input gears for maximum strength and minimum hassle.
Soaking up a wide range of surfaces is made easy with the included coil-over-oil shocks. Factory set to handle everything from fast speed runs to snow and mud chucking, no matter where you choose to bash, these high-quality units will keep you stable and in-control.
The shock absorbers on the TYPHON 4X4 MEGA feature silicone O-rings, keyed spring perch and self-bleed design. These shocks are designed to be simple to maintain yet offer all the performance required to give amazing handling.
The tough molded composite chassis has been enhanced, adding extra strengthening reinforcement and retained aluminum suspension hangars for maximum durability.
Easy-access Power Module assembly can be removed from the vehicle in seconds, with the removal of just one single screw. The center shaft assembly is telescopic to assist with the easy disassembly and is sprung loaded to ensure it stays in position in use.
The Power Module features improved sealing to prevent dirt, dust and debris entering, increasing durability in this area.
With the Power Module removed from the vehicle you can easily service your motor, castellated single-pad slipper clutch, spur and pinion gears.
The 4X4 MEGA power system features a high-torque 550 sized 12 turn brushed motor.
The 90T 48dp spur gear features a proven castellated slipper pad from the BLX vehicles for even more durability.
The sliding gear mesh enables you to fine-tune the gearing of your vehicle to your specific requirements and bashing areas.
Both the front and rear diff modules are super-easy to access in the TYPHON 4x4 MEGA, ensuring that you spend more time bashing and less time in the workshop.
These differentials are TOUGH. The main differential gears have been super-sized with large pitch gears that have been designed to withstand huge torques, allowing lightweight composite material to be used for reduced rotating mass without compromising strength.
The differential internals feature silicone O-rings and full-metal, straight-cut gears, ensuring trouble-free operation.
A full complement of rubber shield bearings is included. The rubber shields help keep dirt out of the bearings for a more durable and highly efficient drivetrain.
Easy-access Electronics Module assembly can be removed from the vehicle with the removal of only 5 screws. With this module removed you can access the servo, electronic speed control and the receiver.
The two-piece molding comprises of a lower box and upper lid that are sealed with high-quality rubber seals. The ESC and steering servo are attached to this molding, whilst the receiver sits inside the waterproof box.
High quality vented dBoots 2-HO tires, coupled with black multi-spoke wheels, offer high bite on a multitude of surfaces. The multi-spoke wheels feature standard 1/8th scale buggy dimensions with 17mm hex size.
The 4X4 MEGA 550 power system features a high-torque 550 sized ARRMA 12T brushed motor and a high-quality ARRMA MEGA ESC unit.
The Spektrum S650 Steering Servo provides fast and consistent steering response on the most demanding surfaces. This servo produces 6kg.cm (84oz.in) of torque.
A waterproof servo case will keep your ARRMA vehicle handling correctly, even when the action gets wet.
With 6kg (84oz) of torque at 6v, this Spektrum S650 Steering Servo can reach full operating angle in just 0.12 seconds.
Included in the box is a high-quality Dynamite 3300mAh 8.4V 7-cell Speedpack 2 NiMH hump battery and ARRMA wall charger.
IC3 battery connectors provide a reliable link between the battery and MEGA ESC.
The Spektrum SLT3 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz SLT technology, your ARRMA vehicle is controlled by an ergonomic wheel and trigger style radio transmitter.
Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.
The SLT3 transmitter is compatible with Tactic receivers.
A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots tires, waterproof ESC and steering servo and a pre-painted bodyshell are all included, as standard.
Please check the vehicle specifications for exact details of what is included in the box and what is required to get your ARRMA vehicle running.
Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.
The included waterproof electronics are ready for action.
* For details on waterproof standards, please refer to the product instruction manuals
TYPHON 4X4 550 MEGA BRUSHED 1/8 BUGGY (GREEN)
30mph / 48km/h
- POWER TYPE
- BUILD STATUS
- BUILD CONFIGURATION OPTIONS
- DRIVE TYPE
- VEHICLE TYPE
511mm / 20.12"
328mm / 12.91"
42mm / 1.65"
306mm / 12.05"
306mm / 12.05"
195mm / 7.68"
- NUMBER OF DIFFERENTIALS
- WEIGHT (INC. SUPPLIED BATTERY)
2.8kg / 6lbs 3oz
8.4v (7 Cell) NiMh Hump Pack or Hardcase 7.4V (2S) Lipo within max dimensions 165 x 51 x 48mm / 6.5 x 2.01 x 1.89 inches
2 Year Limited